Introduction:
Designed with one goal in mind - Keep your engine clean and healthy!
The purpose of a catch can system is to collect/vent the blowby vapors inherent as part of the combustion process. The factory setup sucks these oily vapors directly back into the engine exposing them to everything in their path.
In the short term getting these vapors out of the combustion path reduces knock retard by not allowing oil vapor to mix with the air fuel mixture. In addition the more free flowing lines allow the engine to rev easily giving a more responsive feel to the engine as a whole.
Over the long haul these un tended to vapors will build up over the intake valves leading to a host of running issues and an expensive repair bill to fix. With a catch can installed you will save yourself from dealing with this hassle.
Take a peak at the see more images gallery located at the top of the page for images of both the buildup and the cause of it.
Includes:
- Billet Valve Cover Plate
- Billet PCV Adapter
- Billet Manifold Cap
- Billet Valve Cover Fittings
- High Capacity Catch Can
- Dip Stick
- Integrated Drain
- Laser Cut Catch Can Bracket
- Catch Can Clamp
- O Rings
- Retaining Hardware
- Push Lock Hose
Product Instructions:
Notes:
Installed in under two hours
Compatible with BSH Boost Tap
A Complete PCV Fix
Click the link below for an article explaining everything about oil catch cans and why they are so beneficial!
https://www.redline-motorworks.com/kb_results.asp?ID=8
