|
BSH Billet Rear Sway Bar End Links VW Mk5 & Mk6
|
|
BSH 2.0T FSI/TSI Boost Tap
|
|
Forge Motorsport MK5 Golf/Jetta/A3 2.0T FSI 8 Piece Coolant Hose Kit
|
|
|
|
List Price: $49.99
Our Price: $49.99
Sale Price: $47.49
You save $2.50!
|
|
|
|
|
|
|
BSH is pleased to release its billet sway bar end links for
all A5 chassis vehicles. This is designed to be a direct replacement
for your factory end links and is compatible with either the stock or
BSH 27mm swaybar.
The factory end links are very weak and
under hard cornering will flex and diminish the handling and response
of your tuned suspension. By increasing the strength of the end links
your suspension will feel more responsive as you corner .
Equipped
with spherical bearings and shortened slightly compared to factory, the
BSH end links will allow for proper suspension travel and better
fitment of rear swaybars on cars with varying ride heights.
Fitment:
MKV Gti/Jetta/Rabbit
MKV R32
Audi A3 2.0T
Audi A3 3.2
B6 Passat FWD
Includes:
Billet End Link Bodies
Spherical Bearings
Billet Spacers
HardwareBSH End Link Instructions
|
BSH is proud to bring you its all new billet boost tap for the FSi and TSi 2.0T. Utilizing CAD drawing and CNC Lathe machining this part is a perfect fit every time. The BSH boost tap comes with two ports so you can run your boost gauge, dv, methanol injection, or any other part you may want that requires a boost or vacuum signal to function. This part installs in minutes and comes with everything needed to install including a blockoff plug for one port and a no buzz fitting.
Product Instructions:
BSH Boost Tap Instructions
Notes:
*Fully Compatible with BSH FSI PCV Fixes!*
|
This Silicone Coolant Hose Kit for 2.0 FSiT comprises of 8 hoses. This product is for FSi models only, it will not fit TSi.
This product is normally fitted in combination with FMKT010
Please be aware that these hoses were patterned from right hand drive vehicles. Whilst we believe these to be correct for left hand drive vehicles we suggest that you visually check their suitability, as replacement items, with those fitted to your own vehicle, before attempting installation.
|
|
|
|
BSH 09 2.5L Rabbit / Jetta Cold Air Intake
|
|
BSH 2.5L MkV Rabbit & Jetta Cold Air Intake (06-08)
|
|
Evolution Motorsports 2.5L V-Flow Air Induction System
|
|
List Price: $259.99
Our Price: $259.99
Sale Price: $246.99
You save $13.00!
|
|
|
|
List Price: $269.99
Our Price: $269.99
Sale Price: $256.49
You save $13.50!
|
|
|
|
|
|
|
New from Bulletproof Speed Hardware is our cold air intake system for
the 2009 2.5 liter VW’s. For the 09 model year vehicles VW has
changed the management system to a MAP based system for the 2.5 and has
removed the MAF sensor from the equation. This required a design change
from our system for the earlier MAF based cars.
Through
extensive testing we have ensured that this product does not produce a
check engine light once installed. Just like our previous intake For
the MAF based 2.5 this intake provides a notable 8- 10 hp in the mid
range of the power band and is accompanied by an amazing head turning
growl. The BSH 09+ intake remains the only one piece intake on the
market for the 2.5, this design allows for a clean installation with no
chance of leaking down the road. This part is a direct replacement for
the factory intake system and installs without any modifications.
Includes:
- Lightweight Aluminum Intake Tubing
- CNC Lathed Secondary Air Injection Adapters
- Proprietary BSH Air Filter with Inverted Cone top
- All silicone couplers, clamps and hardware needed to install
Horsepower Gains:
Horsepower - 10-15 hp
Torque 8-12 ft lbs
Important Notes:
This
is a true cold air intake and caution will need to be exercised when
driving in rain. It is important to avoid submerging the filter or
exposing it to large quantities of water.
Installation Instructions available online. Click here.
|
BSH is proud to bring you its all new intake system for the
2.5 liter. This new system puts a new twist on an old favorite. The BSH
intake separates itself from the pack by being the only one piece on
the intake on the market for the 2.5. The one piece design allowed BSH
to integrate the MAF housing into the plumbing to no longer require a
MAF reducer to avoid a check engine light. This part is a direct
replacement for the factory intake system and installs without any
modifications to the vehicle.
Dyno:
Dyno information is available by clicking on the see more images link.
The test car was a bone stock 2008 Rabbit. Chip tuning will yield even
better results!
Includes:
Intake Tubing with CNC machined MAF flange
CNC Lathed Secondary Air Injection Adapters
Proprietary BSH Air Filter with Inverted Cone top
All silicone couplers, clamps and hardware needed to install Notes:
This is a true cold air intake and caution will need to be exercised
when driving in rain and snow. It is important to avoid submerging the
filter or exposing it to large quantities of water.
Installation Instructions available online. Click here.
|
Evolution Motorsports proudly announces the release of the V-flow Air Induction systems for the 2.5L VW. Engineered utilizing state of the art CAD CAM 3D modeling, CNC machining, computer controlled Superflow air flow testing, rotational molding, injection molding and countless man hours, these systems represent the apex of air induction technologies.
-5-7whp and 10-15wtq gains have been seen on 87oct
-7-10whp and 15-18wtq gains have been seen on 91oct
-8-13whp and 16-20wtq gains have been seen on 93oct
|
|
|
|
BSH 2.0T TSI Race Air Intake System
|
|
|
|
|
|
|
|
|
BSH 2.0T TSI Race Air Intake System
|
|
|
