|
Forge Motorsport Recirculation Valve Hoses for Nissan R35 GTR
|
|
Forge Motorsport Silicone Coolant hoses for the Nissan GTR R35
|
|
Forge Motorsport Recirculation Valves for the Nissan GT R35
|
List Price: $65.00
Our Price: $65.00
Sale Price: $58.50
You save $6.50!
|
|
|
List Price: $180.00
Our Price: $180.00
Sale Price: $162.00
You save $18.00!
|
|
|
List Price: $500.00
Our Price: $500.00
Sale Price: $450.00
You save $50.00!
|
|
|
|
|
|
A pair of Silicone hoses for fitment on the return side of the turbocharger recirculation valves.
Available in Red, Blue or Black
|
A set of Silicone Coolant Hoses (6) for the Nissan GTR R35
These hoses replace the top radiator hose, botttom radiator hose, top header tank hose, bottom header tank hose, hose from the engine filler to the block, and the water overflow hose. The are made from high quality reinforced silicone which means that they can withstand the 1.8 bar pressure from the Spec V radiator cap, should you have one fitted.
|
These valves are a direct replacement for the (OEM) original valves. They offer significantly higher flow rate capability, where other valves are just not up to it. This is achieved by utilizing an amazing 50mm (2") bore. For fine tuning there is a variable spring preload incorporated and a ratchet type top adjuster that will allow for the positive and precise adjustment . This valve incorporates a unique conical, progressive rate spring that can allow for the retention of boost pressure up to 34 PSI. To ease installation there is a 360 degree adjustable vacuum hose connector.
Price is per Pair.
|
|
|
|
Forge Motorsport Pair of Blow Off Valves for Nissan GTR35
|
|
Forge Motorsport Pair of Piston Actuators for Nissan GTR R35
|
|
Forge Motorsport Nissan GTR R35 Front Mounted Intercooler
|
List Price: $500.00
Our Price: $500.00
Sale Price: $450.00
You save $50.00!
|
|
|
List Price: $600.00
Our Price: $600.00
Sale Price: $540.00
You save $60.00!
|
|
|
List Price: $3,000.00
Our Price: $3,000.00
Sale Price: $2,700.00
You save $300.00!
|
|
|
|
|
|
A pair of adjustable atmospheric ( Blow Off) twin piston valves for the Nissan GTR35.
These valves have been specifically designed and engineered, to offer extreme flow rate capabilityw ith an internal 50mm (2") bore. For fine tuning there is a variable spring preload incorporated and a ratchet type top adjuster that will allow for the positive and precise adjustment that your driving style demands. To ease installation a 360 degree adjustable vacuum hose connector With a choice of inlet and outlet connections the valves can be matched to your engine perfectly. This valve incorporates a unique conical, progressive rate spring that can allow for the retention of boost pressure up to 34 PSI which will be dependant on the state of tune of your vehicle. This unique spring design will also allow for unrestricted piston travel and flow volume regardless of the amount of pre-load adjustment added to the spring.
|
These replacement actuators utilize the latest piston design to irradiate the failures often associated with diaphragm actuators and are supplied complete with brackets ready to install.
This product is assembled with springs suitable for at or slightly above factory boost levels. Additional springs are also included for tuning purposes along with our reverse thread adjuster to ease installation and set up.
This product is designed and built with the intent of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket. Forge Motorsport nor any of it’s Authorized Distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment.
|
This front mounting intercooler has been designed as an upgrade for the Nissan GTR R35 models. After considerable trials, we found that the most efficient for these models, was a core of tube and fin design, and along with an overall increase in dimensions we have been able to improve the cooling ability and reduce the pressure loss across when compared to stock intercoolers. Our own testing was conducted on software tuned vehicles, to ensure that they would be working their hardest and the results showed both a reduction in inlet temperature, an increase in horsepower and torque. The uprated intercooler is supplied with all parts required, including mandrel bent 70mm pipework, silicon hoses, all clips, bolts, and nuts together with comprehensive instructions.
When ordering please select from the options below if Headlight washers are fitted to your vehicle.
|
|
|
