|
BSH Race Catch Can Kit Mk5 GTI/GLI 2.0T FSI 06-08.5
|
|
VW Axle Bolt - A must-have when swapping out your suspension!
|
|
BSH 2.0T FSI Integrated Throttle Body Pipe
|
|
|
|
List Price: $4.97
Our Price: $4.97
|
|
|
|
List Price: $179.99
Our Price: $179.99
Sale Price: $170.99
You save $9.00!
|
|
|
|
|
|
BSH is pleased to announce the addition of the Vent to Atmosphere Race PCV System to its line up of PCV products for your 2.0T FSI. Manufactured in house at our Arizona based facility, the Race PCV System fixes all the major problems associated with the prone to failure PCV system and adds a true catch can to capture all oil vapors that would otherwise make their way back into the engine.
Designed into the system is an additional source of crank case ventilation to ensure the best possible performance on higher horsepower cars. The adapters in this kit do not exist anywhere else in the world and are exclusive to BSH and its line of performance products. In order to ensure proper fitment in the engine bay BSH designed a custom air filter to allow proper clearance of the hood shock while providing complete ventilation. This package is designed to work for all stock turbo or big turbo 2.0T FSI's.
This kit comes complete with every hose, bracket, nut, and bolt needed to install!
The purpose of a catch can system is to collect/vent the blowby vapors inherent as part of the combustion process. The factory setup sucks these oily vapors directly back into the engine exposing them to everything in their path.
Removal of these vapors is especially important on direct injection engines. Port injection engines have detergent enhanced fuel passing over the intake ports constantly cleaning off the intake valves. Direct Injection does not allow for this as the injectors spray right into the combustion chamber. Over time these oils harden and cake to the intake valves causing drastically reduced head flow, cold start misfires, greatly increased knock retard and of course a nice expensive bill to clean it all out.
In the short term getting these vapors out of the combustion path reduces knock retard by not allowing oil vapor to mix with the air fuel mixture. In addition the more free flowing lines allow the engine to rev easily giving a more responsive feel to the engine as a whole.
Take a peak at the see more images gallery located at the top of the page for images of both the buildup and the cause of it. Take a look at that and decide if that's something you want in your engine.
NOTE: Venting the PCV system may not be legal in your state. This part is intended for off road/racing use only.
To avoid allowing the scent of PCV gasses from entering the cabin you will want to use the recirc feature on your air conditioning.
Installation instructions available online. Click here.
Click the link below for an article explaining everything about oil catch cans and why they are so beneficial!
https://www.redline-motorworks.com/kb_results.asp?ID=8
|
|
After months of design BSH is proud to be the first to introduce a truly integrated charge pipe system to the FSI performance community. Featuring a reduction in bends and no diameter changes this addition to your intercooler system will prevent added turbulence to the incoming air to the engine providing smoother power delivery and greater top end potential. Integrated into our throttle pipe system is a pair of our CNC machined *next generation* water methanol injection bungs and a CNC machined noise pipe/dv relocation port. These options set you up to seamlessly integrate any and all options (including full noise pipe delete!) without needing to fabricate your own solutions.
|
|
|
|
H&R Sport Springs Ford Fusion/Mercury Milan/Lincoln MKZ AWD 2010+
|
|
BSH *True Seal* 2.0T FSI Air Intake System 06-08.5
|
|
Evolution Motorsports 2.0T FSI V-Flow Intake + Heat Shield Package (06-08.5)
|
|
List Price: $369.00
Our Price: $369.00
Sale Price: $239.85
You save $129.15!
|
|
|
|
List Price: $299.99
Our Price: $299.99
Sale Price: $284.99
You save $15.00!
|
|
|
|
|
|
|
|
|
|
Description:
BSH is proud to bring you its all new *True Seal* intake system for the 2.0T FSi. Major design features include a proprietary airbox that integrates into the fresh air ducting on the grill of the car. This design ensures that only cool air enters the engine providing you with the most dense oxygen rich air possible. Other considerations include a carefully calibrated MAF sensor flange and an integrated port for the relocation of a diverter valve.
All of these features combine to bring you the most powerfull air intake on the market.
This part is a direct replacement for the factory intake system and installs without any modifications to the vehicle.
Bonuses:
We built our DV relocation port right into the intake so take advantage of one of our great package deals with the Bulletproof DV Kit!
Video:
BSH True Seal Revving at Idle
Includes:
Intake Tubing with integrated DV relocation bung and CNC machined MAF flange
*True Seal* Airbox with Rubber Trim Lock
Proprietary BSH Air Filter with Inverted Cone Top
All clamps and hardware needed for installation
Product Instructions:
BSH True Seal Intake Instructions
Note:
For Passat customers, this intake will only fit if you have a manual transmission. This kit will work on 6spd or DSG VW's and Audi A3's.
DV kit and PCV kits are pictured but not included with this intake.
|
Evolution Motorsports 2.0T FSI V-Flow Intake Package Deal with Heat Shield!
Evolution Motorsports proudly announces the release of the highly anticipated V-flow Air Induction systems for the MK5 VW. Engineered utilizing state of the art CAD CAM 3D modeling, CNC machining, computer controlled Superflow air flow testing, rotational molding, injection molding and countless man hours, these systems represent the apex of air induction technologies. Additionally, our systems also incorporate a custom cotton air filter and a 6” injection molded Venturi that acts as a vacuum for cold-air. All these components work together to create the most powerful VW air intake systems on the market today. Patent Pending
Features:
HP Gain: 10-15
TQ Gain: 10-15
Installs in the factory location
Utilizes factory ram air scoop for increased air flow and efficiency
Utilizes a custom 4 layer, cotton air filter with synthetic 4th layer and a 6” injection molded Venturi that acts as a vacuum for cold-air.
|
|
|
|
BSH *True Seal* 2.0T FSI Air Intake System + Heat Shield 06-08.5
|
|
BSH *True Seal* 2.0T FSI K04 Air Intake System 06-08.5
|
|
BSH 2.0T FSI Complete Billet Mount Package
|
|
|
|
List Price: $319.99
Our Price: $319.99
Sale Price: $303.99
You save $16.00!
|
|
|
|
|
|
|
|
Description:
BSH is proud to bring you its all new *True Seal* intake system for the 2.0T FSi. Major design features include a proprietary airbox that integrates into the fresh air ducting on the grill of the car. This design ensures that only cool air enters the engine providing you with the most dense oxygen rich air possible. Other considerations include a carefully calibrated MAF sensor flange and an integrated port for the relocation of a diverter valve.
All of these features combine to bring you the most powerfull air intake on the market.
This part is a direct replacement for the factory intake system and installs without any modifications to the vehicle.
Bonuses:
We built our DV relocation port right into the intake so take advantage of one of our great package deals with the Bulletproof DV Kit!
Video:
BSH True Seal Revving at Idle
Includes:
Intake Tubing with integrated DV relocation bung and CNC machined MAF flange
*True Seal* Airbox with Rubber Trim Lock
Proprietary BSH Air Filter with Inverted Cone Top
All clamps and hardware needed for installation
Product Instructions:
BSH True Seal Intake Instructions
Note:
For Passat customers, this intake will only fit if you have a manual transmission. This kit will work on 6spd or DSG VW's and Audi A3's.
DV kit and PCV kits are pictured but not included with this intake.
|
Description:
BSH is proud to bring you its all new *True Seal* intake system for the 2.0T FSi. Major design features include a proprietary airbox that integrates into the fresh air ducting on the grill of the car. This design ensures that only cool air enters the engine providing you with the most dense oxygen rich air possible. Other considerations include a carefully calibrated MAF sensor flange and an integrated port for the relocation of a diverter valve.
All of these features combine to bring you the most powerfull air intake on the market.
This part is a direct replacement for the factory intake system and installs without any modifications to the vehicle.
Bonuses:
We built our DV relocation port right into the intake so take advantage of one of our great package deals with the Bulletproof DV Kit!
Video:
BSH True Seal Revving at Idle
Includes:
Intake Tubing with integrated DV relocation bung and CNC machined MAF flange
*True Seal* Airbox with Rubber Trim Lock
Proprietary BSH Air Filter with Inverted Cone Top
All clamps and hardware needed for installation
Product Instructions:
BSH True Seal Intake Instructions
Note:
For Passat customers, this intake will only fit if you have a manual transmission. This kit will work on 6spd or DSG VW's and Audi A3's.
DV kit and PCV kits are pictured but not included with this intake.
|
The complete package of all 3 BSH Billet Motor mounts.
Includes:
BSH FSI Engine Mount
BSH Mk5 Transmission Mount
BSH Mk5 Pendulum Mount
BSH Mk5 Torque Mount
Save some money by purchasing all mounts at the same time with this package deal!
|
|
|
|
BSH 2.0T TSI Complete Billet Mount Package
|
|
BSH *True Seal* 2.0T FSI Air Intake System & Bulletproof DV Kit Package (06-08.5)
|
|
BSH Front Mount Intercooler Kit w/ Garrett Core 2.0T FSI & TSI
|
|
|
|
|
|
|
|
The complete package of all 3 BSH Billet Motor mounts.
Includes:
BSH TSI Engine Mount
BSH Mk5 TSI Transmission Mount
BSH Mk5 TSI Pendulum Mount with Torque Arm Insert
Save some money by purchasing all mounts at the same time with this package deal!
|
Pick up the great sound and performance of a high quality
intake system and take it a step further by fixing a common factory
problem with the 2.0t! We have packaged our highly popular Bulletproof
DV kit with our all new *True Seal* intake system to bring you the most
performance at the best price! Save $75 over buying these parts
separate!
Bonuses:
We built our DV relocation port right into the intake so you can take advantage of this great package deal!
Includes:
Intake Tubing with integrated DV relocation bung and CNC machined MAF flange
*True Seal* Airbox with Rubber Trim Lock
Proprietary BSH Air Filter with Inverted Cone Top
All clamps and hardware needed for installation
DV kit specific silicone
Supersized Forge Diverter Valve
BSH Boost Tap
Factory DV blockoff Note:
For
Passat customers, this intake will only fit if you have a manual
transmission. This kit will work on 6spd or DSG VW's and Audi A3's. A3
and Passat customers must use a GTi throttle pipe and noise pipe for
this kit to function properly.
PCV kits are pictured but not included with this package. BSH Intake Installation Instructions BSH DV Installation Instructions
|
After months of testing the all new Garrett-based BSH Front
Mount Intercooler is available for sale. This intercooler fits both the
FSI and TSI engines. This kit separates
itself from all competition by using an industry leading
Garrett/Honeywell intercooler core. Utilizing the efficiency of this
top shelf core allowed BSH to minimze the size of the core to keep
response high and pressure drop low. To
promote airflow through the intercooler BSH has designed ABS guidance
plates that direct air through the intercooler as opposed to around it.
Lightweight aluminum plumbing and brackety keep the weight of the kit
down while at the same time allowing for a simple bolt on installation.
Testing:
In BSH's road testing this intercooler combination dropped inlet air
temperature by 7 degrees on a bone stock 2.0t and 16 degrees on a Stage
2 + car. Data logs are available for viewing by clicking more images at
the top of this page. This same intercooler is used on their built motor GT3076R shop car which has already broken the 430 whp mark. Includes:
Garrett 550 hp Core
BSH Aluminum Intercooler Piping
BSH Aluminum Intercooler Bracketry
BSH ABS Air Guidance Plates
Silicone Hoses
T Bolt Clamps
All hardware needed for installation Installation Instructions available online. Click here.
|
|
|
